Vesta has tested new fire swing gates.
Vesta company has tested new fire swing gates of small batch production, providing a high degree of security for various premises.
The gates are designed for operation both in the constantly closed and in the open position of the wings. In the first case, the non-working leaf is fixed in the box by mechanical latches, the working leaf is locked by a lock at three points (above, below and in the middle part), and the gate leaf is fixed in the gate leaf by latches at three points (above, below and in the middle part) and is equipped the closer. If the gates are operated in the open position of the sash, the sash is equipped with latches, fixing them in the box at the top and bottom and between each other; closers, tactometer (mechanism for alternately closing the valves), electromagnetic clamps or electric actuators triggered by a fire hazard signal.
The gate set includes sashes, locks and a box. The 3 mm thick system corner box has a three-way rubber seal and is attached to the wall with a dowel anchor, which is supplied. The shutters consist of a metal frame structure and metal three-layer panels with insulation from a mineral wool board TU 5284-010-12447545-2002. Panels can be placed both vertically and horizontally, depending on the width of the gate. The gates are equipped with mortise locks with push handles and a latch.
The dimensions of the manufactured gates are up to 4000 x 4000 mm (width x height). The basic colors of the gate according to RAL are 5005, 7004, 8017, 9003.
Vesta swing gates can also be equipped with a set of additional functions, including a built-in door in a non-working leaf with a passage of 800x1900 mm (BxH), a hatch for fire hoses (in this case, the hatch blade is equipped with a hinge with a built-in spring designed for self-closing the hatch). customer, the gate can be painted with enamel according to the model "RAL".